{"product_id":"aluminum-ladder-rack-flat-roof-enclosed-cargo-trailer","title":"Aluminum Ladder Rack for Flat Roof Enclosed Cargo Trailers — 5 ft, 6 ft, 7 ft, 8.5 ft, or Adjustable Widths","description":"\u003cp\u003e\u003cstrong\u003eHeavy-duty aluminum ladder rack for flat-roof enclosed cargo trailers.\u003c\/strong\u003e Lightweight extruded aluminum construction with a lifetime rust-free guarantee — won't corrode, won't bend, and won't need repainting every few years like a steel rack will. Available in \u003cstrong\u003e5 fixed widths\u003c\/strong\u003e (5 ft, 6 ft, 7 ft, 8.5 ft) plus an \u003cstrong\u003eadjustable width version\u003c\/strong\u003e that spans 6 ft to 8.5 ft, covering the full range of standard enclosed cargo trailer widths.\u003c\/p\u003e\n\n\u003cp\u003eBolt-on installation, mounts to the roof rail of any flat-top enclosed cargo trailer, and carries ladders, conduit bundles, lumber, pipe, kayaks, or anything else you need to keep off the trailer floor and out of the weather.\u003c\/p\u003e\n\n\u003ch3\u003e⚙️ Why Aluminum Over Steel\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRust-free for life\u003c\/strong\u003e — no paint chips, no rust bleed, no annual refinishing. Critical for trailers that see salt, moisture, or coastal use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoughly half the weight\u003c\/strong\u003e — aluminum is ~3 lb per section vs 10-15 lb for comparable steel. Easier to lift onto the roof, less payload capacity consumed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleaner appearance\u003c\/strong\u003e — mill aluminum finish looks factory-fresh for years. No flaking or fading.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoesn't gall hardware\u003c\/strong\u003e — aluminum is gentler on stainless or zinc-plated bolts than bare steel; easier to disassemble years later.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e📏 Choosing the Right Width\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5 ft\u003c\/strong\u003e — fits standard 6' wide enclosed cargo trailers (the rack mounts inside the rooftop rails, so a 5 ft rack on a 6 ft trailer leaves clearance). Best for small 5x8, 6x10, 6x12 trailers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 ft\u003c\/strong\u003e — fits 7' wide enclosed trailers (7x14, 7x16, 7x18). The most common trailer size on the road.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e7 ft\u003c\/strong\u003e — fits 8' wide enclosed trailers (8x16, 8x20, 8x24), including most contractor-grade and car-hauler enclosed trailers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8.5 ft\u003c\/strong\u003e — fits full 8.5' wide enclosed trailers (8.5x20, 8.5x24, 8.5x28), the largest common enclosed cargo trailer size.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable (6-8.5 ft)\u003c\/strong\u003e — telescoping \/ extendable design that fits anywhere from 6 ft to 8.5 ft roof rail spacing. Perfect if you're not sure of exact measurements or you may move the rack between multiple trailers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTip: measure from the outside of one rooftop rail to the outside of the other — that's the dimension you're matching. Leave 1–2\" of clearance for mounting hardware.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003e📐 Specifications (all widths)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Extruded aluminum — mill finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e 1-section flat-roof ladder rack (single crossbar section)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bolts to roof rail — standard hardware, no welding required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Flat-roof (non-curved) enclosed cargo trailers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth options:\u003c\/strong\u003e 5 ft, 6 ft, 7 ft, 8.5 ft (fixed) or Adjustable 6–8.5 ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVendor:\u003c\/strong\u003e Forest River\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e Typically 3 lb per section (fixed widths); 5 ft version may vary based on configuration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e🛠 Typical Uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eContractors\u003c\/strong\u003e — extension ladder + step ladder + conduit, all above the load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLandscapers\u003c\/strong\u003e — rake\/shovel\/rake combos and extra trimmer line tubes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePainters\u003c\/strong\u003e — multiple ladder sizes plus extension poles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHVAC techs\u003c\/strong\u003e — ductwork runs, copper line sets, longer pipe material\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDIY \/ homeowner\u003c\/strong\u003e — lumber, PVC, kayaks, canoes, SUP boards\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMobile mechanics\u003c\/strong\u003e — floor jacks, creepers, longer tools that don't fit inside the work area\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e🔧 Installation Notes\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eConfirm your trailer has a \u003cstrong\u003eflat roof\u003c\/strong\u003e (not a curved or rounded roof). This rack is designed for flat-top enclosed trailers only.\u003c\/li\u003e\n\u003cli\u003eMeasure the outside-to-outside distance of your roof rails; match that to a width option (add 1–2\" clearance for hardware).\u003c\/li\u003e\n\u003cli\u003ePosition the rack squarely on the roof rails and mark the mounting bolt locations.\u003c\/li\u003e\n\u003cli\u003eDrill through the roof rails for through-bolts (3\/8\" hardware typical; sold separately).\u003c\/li\u003e\n\u003cli\u003eInstall with oversized fender washers on both sides of the rail to distribute load and prevent pull-through.\u003c\/li\u003e\n\u003cli\u003eSeal around each bolt hole with marine-grade sealant to prevent water intrusion into the trailer interior.\u003c\/li\u003e\n\u003cli\u003eTorque to snug — aluminum is softer than steel, don't over-crank.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003e💡 Pro Tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo racks are better than one.\u003c\/strong\u003e For carrying a ladder, you need a front and rear rack — one keeps things from rolling, two keep them from sliding. Consider ordering a matched pair.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdd tie-down points.\u003c\/strong\u003e The top of the rack accepts aftermarket tie-down eyes; straps secure cargo.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable is safest for multi-trailer shops.\u003c\/strong\u003e If you run more than one trailer, the adjustable version fits anything. Fixed widths are simpler and slightly lighter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeep lag bolts out.\u003c\/strong\u003e Never use screws into wooden roof framing — only through-bolt to the aluminum rail. Roof screws will pull out under load.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e❓ FAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Will this fit my curved-roof trailer?\u003c\/strong\u003e\u003cbr\u003e\nNo. This is designed for flat-roof enclosed cargo trailers only. Curved roofs (common on recreational trailers and some older cargo units) require a different rack design.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ: How much weight can it carry?\u003c\/strong\u003e\u003cbr\u003e\nThe rack itself is rated for a typical ladder or pipe load (~150 lb across the section). Total capacity is usually limited by your roof rails, not the rack — check your trailer manufacturer's roof load rating before loading heavy cargo.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ: Is mounting hardware included?\u003c\/strong\u003e\u003cbr\u003e\nNo. Through-bolts, fender washers, and nylock nuts sold separately. Any standard 3\/8\"–1\/2\" trailer hardware works.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ: Can I install one at each end of the trailer?\u003c\/strong\u003e\u003cbr\u003e\nYes — this is how most ladder\/conduit hauls work. Order two of the same width, install one near the front and one near the rear of the roof.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ: How do I know what width to order if my trailer is between sizes?\u003c\/strong\u003e\u003cbr\u003e\nGo with the Adjustable (6-8.5 ft) version. It telescopes to fit anywhere in that range and eliminates the risk of ordering the wrong size.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ: Will this fit a V-nose trailer?\u003c\/strong\u003e\u003cbr\u003e\nYes, as long as the roof is flat (not curved). V-nose only affects the front of the trailer, not the roof profile.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e📞 Call\/Text: 517-225-1991   🌐 AAATrailer.com\u003c\/strong\u003e\u003c\/p\u003e","brand":"Forest River","offers":[{"title":"5 ft","offer_id":52776313880885,"sku":"1620X27047A","price":175.01,"currency_code":"USD","in_stock":true},{"title":"6 ft","offer_id":52776313913653,"sku":"01620X27049A","price":190.0,"currency_code":"USD","in_stock":true},{"title":"7 ft","offer_id":52776313946421,"sku":"01620X27051A","price":192.5,"currency_code":"USD","in_stock":true},{"title":"8.5 ft","offer_id":52776313979189,"sku":"1620X27056A","price":240.0,"currency_code":"USD","in_stock":true},{"title":"Adjustable (4-8.5 ft)","offer_id":52776314011957,"sku":"01620X27051AA","price":109.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/9144\/0181\/files\/1620X27047A-aluminum-ladder-rack-flat-roof-5-ft-main.jpg?v=1778411781","url":"https:\/\/aaatrailer.com\/products\/aluminum-ladder-rack-flat-roof-enclosed-cargo-trailer","provider":"AAA Trailer","version":"1.0","type":"link"}